新闻资讯

NEWS CENTER
  • 玻璃栏杆安装时常见问题
  • 本站编辑:杭州烨群装饰工程有限公司发布日期:2019-12-17 18:46 浏览次数:

 玻璃栏杆安装时常见问题

  同时还需要注意一些相关细节问题:

  1、玻璃栏杆普通不设立杆,但关于人流过于集中的场所,为避免意外事故的发作,应该增设金属立柱;

  2、多层跑马廊玻璃栏杆或扶手的高度应契合修建设计规范的要求,高度应在1.1-1.2m之间;

  3、桥梁栏杆获悉加工过程中,玻璃的周边必定要磨光倒角,还周边切断必须平坦,这样可以有效地削减玻璃的自爆;

  4、底座或立柱下部最棒采用预埋件预埋螺栓方法,以进步玻璃栏杆运用的稳定性。膨胀螺栓方法宜少用;

  5、在玻璃栏杆的施工过程中,依照点缀施工图放线时,必须根据现场实践尺寸调整点缀施工图,以便消除土建施工发作的误差;还,在实践测量、放线所得精确尺寸的基础上还应绘制施工放样详图,作为玻璃及各种配件加工选型和现场装置的精确根据;

  6、玻璃栏杆装置时必定要注意不要在玻璃周边形成破损或缺陷,玻璃周边的这些缺陷的存在,在不均匀的日光温度效果下,很可能发作自爆。

Glass Balustrade installation of common problems, but also need to pay attention to some of the details: 1, Glass Balustrade general do not set up a pole, but on the crowd is too concentrated places, in order to avoid accidents, should be added to the metal column; 2. The height of the Glass Balustrade or handrail of the multi-story race track shall be in accordance with the requirements of the construction design specification, and the height shall be between 1.1 m and 1.2 m; 3. The bridge balustrade must be polished and chamfered during the processing Also the peripheral cut-off must be flat, so as to effectively reduce the self-explosion of glass; 4, the Base or column of the lower part of the best use of pre-embedded bolt method, in order to improve the stability of the use of glass railings. 5, in the construction process of the Glass Balustrade, according to the dotted construction drawing alignment, must adjust the dotted construction drawing according to the site practice size, in order to eliminate the error occurred in civil construction; On the basis of practical measurement and laying-out, the detailed laying-out drawings should also be drawn, which can be used as the basis for the selection of glass and various accessories and on-site Equipment 6, Glass Balustrade device must be careful not to form around the glass damage or defects, the glass around the existence of these defects, in the uneven temperature effect of sunlight, is likely to explode.