新闻资讯

NEWS CENTER
  • 不锈钢栏杆制作的原则有哪些
  • 本站编辑:杭州烨群装饰工程有限公司发布日期:2019-08-24 18:44 浏览次数:

杭州烨群装饰工程有限公司是专业生产、制作、安装各类不锈钢工程的多元化公司,杭州烨群对不锈钢栏杆生产工艺要求十分的严格,每个步骤都力求精益求精。

  在不锈钢栏杆的生产上,深圳精石一直遵循着以下的原则:

  1、不锈钢的尺寸不能允许出现偏离标准的偏差值,避免对焊缝宽度、长度、厚度不足和中心线产生偏移以及弯折等出现偏差,应严格控制焊接部位的相对位置尺寸,合格后方准焊接,焊接时细心操作。

  2、焊缝裂纹问题:一般情况下,为了避免裂纹产生,应该选择合适的焊接工艺以及焊接程序,避免使用大电流,不能突然熄火,焊缝接头应搭接10-15毫米,焊接中不允许搬动、敲击焊件。

  3、表面气孔问题:焊接处应当刷洗干净,焊接过程中适当地选择焊接电流,降低焊接速度,使熔池中的气体逸出。

2-1Z30QI648[1].jpg

Hangzhou qiangqun decoration engineering Co., Ltd. is a diversified company specializing in the production, production and installation of various stainless steel projects. Hangzhouye group is very strict on the production process of stainless steel railings, and every step strives for excellence.
In the production of stainless steel railings, Shenzhen Jingshi has always followed the following principles:
(1) The size of stainless steel shall not allow deviation from the standard, so as to avoid deviation from the weld width, length, thickness, center line and bending, etc.. Handle carefully when welding.
Weld crack problem: Under normal circumstances, in order to avoid cracks, suitable welding processes and welding procedures should be selected to avoid the use of large currents, can not be suddenly turned off, weld joints should be connected 10-15 mm, welding is not allowed to move, knock welding parts.
Surface stoma problem: the welding place should be cleaned, the welding current is selected appropriately during the welding process, the welding speed is reduced, and the gas in the melting pool escapes.