新闻资讯

NEWS CENTER
  • 制作铁艺镀锌方管栏杆
  • 本站编辑:杭州烨群装饰工程有限公司发布日期:2019-08-07 22:03 浏览次数:

1  金属栏杆扶手工程所采用的材料应为现行国家标准规定的钢材《碳素结构钢》(GB/T 700-1988)中的Q235钢,《不锈钢》(GB/T 1220-1992)中的0Cr18Ni9不锈钢或SUS 304不锈钢,《夹层玻璃》(GB9962)规定的夹层玻璃,《钢化玻璃》(GB9963)规定的钢化玻璃。

 2  金属栏杆扶手工程所采用的材料应具有质量证明书,并应符合设计的要求。当对钢材、玻璃的质量有疑义时,应按国家现行有关标准的规定进行抽样检验。  

3  金属栏杆扶手工程所采用的连接材料和涂装材料,应具有制造厂商的出厂质量证明书,并符合设计要求和国家现行有关标准的规定。

1 the material used in the metal railing and armrest works shall be Q235 steel in carbon structural steel (GB/T 700-1988), 0Cr18Ni9 stainless steel or SUS 304 stainless steel in stainless steel (GB/T 1220-1992), sandwich glass in GB9962 and tempered glass in GB9963, as stipulated in the current national standards.

The materials used for the metal railings shall have quality certificates and shall meet the design requirements. When there is doubt about the quality of steel and glass, sampling inspection shall be carried out according to the provisions of the current relevant standards of the state.

The connecting materials and coating materials used in the metal railing handrail engineering should have the manufacturer's quality certificate, and meet the design requirements and the provisions of the current national standards.